Art PlaysArt Plays
  • HOME
  • Blog
  • Gallery
  • Drawing Ideas
  • STORE
  • ABOUT
  • account

Category Archives: How to Make

111
23.10.2021
How to Make, DIY, Flowers, Handmade, Homemade, Plants

How to Make Flowers Yourself (7 Easy Steps)

This guide will teach you how to make flowers with your own hands step by step. Beautiful roses to decorate your interior. How to Make Miniature Roses You will…

Read more

без названия 74nnijtmde8lq2ajiy2aek3if68j20jdre
10.07.2021
Arts, DIY, How to Make, Toys

How to Make Simple Dimple (DIY Easy 6 Steps)

Relaxing toys have become very popular lately. Today you will learn how to make simple dimple, a relaxing toy that has taken over the whole internet. How to make…

Read more

missing bead 1176448 1919x1602 1 73mb2ffyfgidbj27hp9hl18h2ajyzjzim6
28.04.2021
Beadings, DIY, How to Make

How to Make Beads (Easy lesson 1: Bee Beads and Butterfly Beads)

Today we will learn step by step how to make beads and butterfly beads. The basics of beading we covered in this article. How to Make Beads (Bee) Tools…

Read more

How to make nft art in 2021
31.03.2021
Art, How to Make, NFT

How to Make NFT Art (Easy Best Ideas in 2021)

If you are interested in how to make NFT art token, then read this article. NFT is a technology that will have a huge impact on all areas of…

Read more

pexels cottonbro 3952240 scaled e1614718080676 72z82ij2r5cmj65jq306gqrl4l29q7sw76
02.03.2021
Art, DIY, Handmade, Homemade, How to Make

How to Sew a 3D Face Mask (5 Easy Steps)

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they…

Read more

5/5

Instagram

How to draw a cat?😼 Follow 👉 @art.plays By 2006253393 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
How to draw a cat?😼 Follow 👉 @art.plays By 2006253393 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

3 weeks ago
View on Instagram |
1/9
🐶 🎨 ❤️ 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 👉 @art.plays By 48130870549 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
🐶 🎨 ❤️ 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 👉 @art.plays By 48130870549 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
🐶 🎨 ❤️ 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 👉 @art.plays By 48130870549 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

1 month ago
View on Instagram |
2/9
Watermelon🍉 or melon🍈? 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 👉 @art.plays By 84038875991 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
Watermelon🍉 or melon🍈? 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 👉 @art.plays By 84038875991 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

1 month ago
View on Instagram |
3/9
Do you like batik? 🎨 Follow 👉 @art.plays By electricmandala (TK) 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 💥
Do you like batik? 🎨 Follow 👉 @art.plays By electricmandala (TK) 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 💥
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

1 month ago
View on Instagram |
4/9
Relaxes 🎨 Art Follow 👉 @art.plays By quan6164 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
Relaxes 🎨 Art Follow 👉 @art.plays By quan6164 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
Relaxes 🎨 Art Follow 👉 @art.plays By quan6164 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

1 month ago
View on Instagram |
5/9
🎨 Can I also make myself such a phone case?🤔 Follow 👉 @art.plays By tongxue456 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 DM 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨
🎨 Can I also make myself such a phone case?🤔 Follow 👉 @art.plays By tongxue456 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 DM 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

2 months ago
View on Instagram |
6/9
Follow 👉 @art.plays By 1067522246 (Döuyin) 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

2 months ago
View on Instagram |
7/9
Learning 🎨 to draw an illusion 😵 Follow 👉 @art.plays By xlr1206 (Döuyin) 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

2 months ago
View on Instagram |
8/9
Follow 👉 @art.plays By diaoke151 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌 🆓 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨
Follow 👉 @art.plays By diaoke151 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌 🆓 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨
Follow 👉 @art.plays By diaoke151 (Döuyin) 𝐂𝐨𝐩𝐲𝐫𝐢𝐠𝐡𝐭 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧𝐬 👉 𝐃𝐌 🆓 𝗦𝘁𝘂𝗱𝘆 𝗻𝗼𝘄 𝗳𝗿𝗲𝗲 𝗮𝗿𝘁 𝗹𝗲𝘀𝘀𝗼𝗻𝘀 𝗼𝗻 𝗺𝘆 𝗯𝗹𝗼𝗴 🎨
art.plays
art.plays
•
Follow

Today I wanted to share my look at 3d face masks now these masks are super quick and easy to make, but most of all I find them they are pretty comfortable to wear so you can see that they give good coverage over your nose and chin and you have enough room in the front so you don’t feel like you can’t breathe. Let’s get started!

How to make a 3D face mask

This is a two layer fabric face mask and i recommend you use only 100 quilting cotton to make these masks.
you can either use the same fabric for both the outside and the inside of your face mask just as i did for this one or you can use two different fabrics one for the outside one for the inside.

Materials you will need for your face mask

экрана 2021 03 02 15 20 35 2
  • You will need two 10 inch wide by seven inch tall pieces of quilting cotton
  • Two 10 inch long pieces of elastic
  • You will of course need a cutting mat
  • Ruler
  • Rotary cutter
  • Your sewing machine iron and your thread

Step 1

Okay, so put your two quilted cotton pieces on your cutting mat I like to line them up with lines on my mat as it helps with my cutting and what we need to do now is cut little triangle corners on each side of the face mask and we cut two inch triangles here so cutting mat is really great for this that we don’t need to do any markings because the markings are already there.

экрана 2021 03 02 15 20 52

Two inch mark here join these with my ruler and cut because you see and i’m doing both layers at once as it saves on my work now of course if you were making more masks at once you can totally stack up more fabrics and do this step again we are going to cut out the corner here so find two inch mark right here join these and cut and doing the same right here one two inch mark two inch mark and just make sure you cut you measure well.

So you don’t cut your fabric wrong because that wouldn’t be good all right so this is what our panels look like both the inside of the mask and the outside of the face mask.

Step 2

Now place your panels right sides together like that match up all the edges and use a few pins to hold the layers. Go to your sewing machine and stitch all the way around pivoting when you get to the corners here all the way around leaving about a three inch opening in the bottom seam back stitching at the beginning and at end and also make sure you use a quarter inch seam allowance.

экрана 2021 03 02 15 22 13

step 3

Open your face mask reach inside and turn it right side out like so now i’m going to place my finger inside the mask and go from the inside just go along the seams kind of pushing them out neatly like so make sure everything is nice and pointy and this way it also helps your seam stay nice and flat go smooth it out like that now take your face mask to your ironing board and press really well using hot iron and steam.

экрана 2021 03 02 15 22 51

Step 4

Okay i top stitched my face mask along the bottom seam and the top seam and i then took it to my ironing board placed it right side down and folded the top edge by one and three quarter inches pressed it and folded the bottom edge up by one and three quarter inches and pressed it as well make sure to use steam and a hot iron set on cotton setting so you get nice and crisp edges and now i’m going to top stitch along these folded edges using 1,8 inch seam allowance back stitching at the beginning and end.

Снимок экрана_2021-03-02_15-23-04
Снимок экрана_2021-03-02_15-23-46
Снимок экрана_2021-03-02_15-24-23
Снимок экрана_2021-03-02_15-24-43
Previous
Next

step 5

Now it’s time to add our elastic for ear loops so what i’m going to do is place it right here on the edge and fold it over by about 3,8 inch seam allowance as you can see place the elastic inside it has enough room in there that it can move and i’ll just use a pin right here to hold this edge in place while i’m sewing and again use 1,8 inch seam allowance to stitch this little elastic fold over and back stitch at the beginning and end.

экрана 2021 03 02 15 25 25

Here is my one elastic and i will add the other one using exactly the same instructions just fold it over right here i’ll pin it to hold the bottom edge in place and i’ll stitch using 1,8 inch seam allowance now i finished these little channels for my elastic as you can see right here and all we need to do is just stitch the elastic together so it forms loops for the ears and we’ll be all finished.

Finale

And now the super magic part turn it right side down open these flaps and fold your mask in half like that while pulling the flaps out this will be your top flap bottom flap right here pull it like that on both sides line it up neatly like so now i like to take my face mask to a pressing board and just give it a good press so these top top and bottom flaps stay out nicely and you’re all finished here’s your face mask i hope you guys enjoyed this tutorial.

экрана 2021 03 02 15 27 10

Art by Sotak Handmade

2 months ago
View on Instagram |
9/9
View on Instagram

Categories

Tags

Acrylic acrylic paint Among Us Animals anime art Art from follower Batik Beading CARDS craquelures creativity decor Decoupage DIY do-it-yourself drawing Eyes followers Fortnite Glows in the dark Halloween hand handmade Hobby homemade How to Draw How to make How to Shade interiors markers NFT Oil painting origami Paint painting pen drawing RETRO SCRAPBOOK scrapbooking sketching toy Vintage Wall painting watercolor
имени

Guest post

Email: [email protected]

Public Offer

Shipping Policy

 

🎨
2020-2021
Privacy Policy

Сart

IOS app is still in development, but you can install it now by following these instructions: