Today you will learn how to make Huggy Wuggy toy with your own hands step by step. You will need a minimum of skills and materials. Make yourself and your loved ones happy with a toy made with your own hands.
How to Make Huggy Wuggy Toy Step-by-Step
Total Time: 45 minutes
Step 1 [How to Make Huggy Wuggy]
The first thing you need to do is to put both parts of the head together and sew them together, leaving the straight edge open – this will be the opening for the neck.
Step 2 [How to Make Huggy Wuggy]
Once the darts are made, place the two torso parts together and join them on the top straight edges between the arm and neck holes, then attach the head to the torso by aligning the neck holes.
Step 3 [How to Make Huggy Wuggy]
Then sew along each side of the torso, leaving the bottom edge open for the legs, for the arms fold them in half and start the long edge in the middle, repeat for the second arm, leaving the upper and lower short edge open, sew along the longest side, do the same for the second hand.
Step 4 [How to Make Huggy Wuggy]
Place the two arm parts together and join them, leaving the straight edge open repeat for the second two arm parts join each arm to the aligning arm so that the thumb is closer to the body and it can be opened in the middle, when finished, sew each arm to the aligning armholes for the legs simply fold them in half and sew them along the longest edge only.
Repeat for the second leg detail and for each leg, place the two pieces together and join them, leaving the straight edge open, repeat for the second leg, sewing each leg to each leg with the thumb pointing inward and making sure that the leg seam is on the other side when you turn it over.
Step 5 [How to Make Huggy Wuggy]
Do the same for the next leg, when both legs are ready, sew each leg to the bottom of the body, starting at the far corner for each sewing line, making sure the seam is centered.
Step 6 [How to Make Huggy Wuggy]
Use the gap left after the dart to flip the teddy vertically, when it is flipped over, stuff it, using the invisible switch to close the open edge for the lips, place both parts together with the tracing paper up and start to join them, leaving enough gap, to flip it upright and stuff it lightly, using an invisible stitch to cover the open end, take a suitable red thread and stitch a line in the center of the mouth to create an impression of the lips, attach the mouth to the head and use an invisible stitch to join them together.
Using suitable black thread, sew the pupils to the center of the whites of the eyes, attach each eye over the mouth and, using reverse stitching, sew them on each hand, using some yellow thread, sculpt the four fingers, stitching lines to create indentations in the fabric, do the same for the legs.
Finally, take a ribbon or cut blue fabric and tie a bow around your neck to complete the plushie.
And this is how you will make the cuddle plushies.
- White Minky, Black Minky, Blue Faux Fur, Red Minky, PolyFil, Matching Thread
- Pins and Needles.
Materials: White Minky, Black Minky, Blue Faux Fur, Red Minky, PolyFil, Matching Thread, Pins and Needles.
More Huggy Wuggy toy ideas
Huggy Wuggy Toy plush from the game Poppy Playtime
Huggy Wuggy ✋ Poppy Playtime with Clay
Huggy Wuggy of paper
Making Huggy Wuggy Sculpture
I hope you enjoyed this collection of lessons. Write in the comments which lesson you’d like to see next.